Water Distiller for Laboratory
- Product Description
Water Distiller for Laboratory
1.Use
This product uses electric heatingmethod toproducesteamwith tap waterand thencondensingtoprepare thedistilled water. Forlaboratory use inhealth care,research institutes, universities.
2.The main technical parameters
| Model | DZ-5L | DZ-10L | DZ-20L |
| specification | 5L | 10L | 20L |
| Heating power | 5KW | 7.5KW | 15KW |
| Voltage | AC220V | AC380V | AC380V |
| capacity | 5L/H | 10L/H | 20L/H |
| connecting line methods | single phase | Three phase and Four wire | Three phase and Four wire |
After open thecarton,pleasereadthemanualfirst,and installthis water distiller according to the diagram.The equipment needsfixed installationuse, while paying attention tothe following requirements:1, Power: the user should Connect power supplyaccordingto the productnameplateparameters, should use theGFCIat the power place(must be installedin the user’scircuit), the shell of the water distillermust be grounded. To ensurethe safe use,thewiringplug and socketshould be allocationed, according to theelectriccurrent.(5 liters, 20 liters: 25A; 10 liters: 15A)
2, water: connectthe water distiller and the water tap by the hosepipe.The exit of the distilled water should be connectedthe plastic tubing(tube lengthshould becontrolledin20CM),let the distilled water inflowinto the distilled watercontainer.
