Plastic Concrete Cube Mould
- Product Description
Plastic Concrete Cube Mould
We offer a variety of cast iron and plastic cube moulds in China that meet the requirements of the standards below. Our cast iron cube moulds consist of four parts with a clamp type steel baseplate. The plastic cube mould is a one piece mould made from robust plastic. The specimen is ejected from the mould by compressed air requiring only a simple clean and oiling before being ready to use again. All moulds are manufactured with stringent tolerances.
Single-cavity plast
ic cube mold. Used for compression testing of concrete cubes and for mortar specimens in the time of initial and final setting of concrete.
150 x 150 x 150mm
The single-cavity Plastic Concrete Cube Mold is used to cast concrete compressive strength specimens or specimens for mortar penetration testing.
The single-cavity Plastic Concrete Cube Mold is used to cast concrete compressive strength specimens or specimens for mortar penetration testing.
Specimen removal is simple, fast and easy. Just remove the plug from the hole in the bottom of the mold and apply compressed air to the hole. The mold will slide right off the hardened specimen. Replacement plugs sold separately.
In substitution of plug, tape can be used to cover the hole.
Form release recommended prior to use.
Inside Dimensions 5.9 x 5.9 x 5.9in (150 x 150 x 150mm), WxDxH
Outside Dimensions 8.5 x 8.5 x 7.1in (216 x 216 x 180mm), WxDxH
These one-piece moulds,made from hard plastic,strong,light,undeformable;resistant to vibration shocks and wear,do not require mounting and dismounting operations,thus saving time and labour.
The specimen is expelled from the mould by compressed air or water.they just require a simple clean and demould oiling before being ready for use again for many times.
