Cement Specific Surface Area Apparatus

Cement Specific Surface Area Apparatus/Auto Blaine Apparatus

TheAutomatic BlaineTestApparatusis microprocessor-controlled analyzer for measurement of the specific surface (Blainevalue) of powders.

SZB-9 type automatic specific surface area measuring instrumentAccording to the requirements of the new standard CBT8074-2008, the company and the National Building Materials Research Institute of Cement and New Materials Institute of Equipment and Equipment Quality Supervision, Inspection and Testing Center developed a new SZB-9 type cement specific surface area automatic measuring instrument. The machine is controlled by a single-chip microcomputer and is operated with full touch keys to automatically control the entire measurement process. Automatically memorize the value of the instrument coefficient, directly display the specific surface area value after the measurement, and automatically memorize the measured specific surface area value while recording the experiment time.

Technical Parameters:

1. Power supply voltage: 220V ± 10%

2. Timing range: 0.1 seconds-999 seconds

3. Timing accuracy: <0.2 seconds

4. Measurement accuracy: <1 ‰

5. Temperature range: 8-34 ℃

6. Specific surface area value S: 0.1-9999 cm² / g

7. Scope of application: The scope specified in GB / T8074-2008

Photo:

DBT-127 Blaine surface area analyzer(Semi-automatic Blaine Apparatus)This instrument is made according to the ASTM204-80 ventilation method of the United States.The basic principle is measured by using a certain amount of air through different resistances when passing through a compacted powder layer with a certain porosity and a certain thickness.It is widely used in the specific surface area of non-porous powdery materials such as cement, ceramics, abrasives, metals, coal rock, gunpowder, etc. Executive standard: GB / T 8074-2008Technical Parameters:1. Diameter of the inner cavity of the breathable cylinder: Φ12.7 ± 0.1mm2. The height of the sample layer of the ventilated circular simple cavity: 15 ± 0.5mm3. Number of holes in perforated plate: 354. Perforated plate aperture: Φ1.0mm5. Thickness of perforated plate: 1 ± 0.1mm6.Net weight: 3.5kg

1.Service:

a.If buyers visit our factory and check the machine, we will teach you how to install and use the

machine,

b.Without visiting, we will send you user manual and video to teach you to install and operate.

c.One year guarantee for whole machine.

d.24 hours technical support by email or calling.

2.How to visit your company?

a.Fly to Beijing airport:By high speed train From Beijing Nan to Cangzhou Xi (1 hour), then we can

pick up you.

b.Fly to Shanghai Airport: By high speed train From Shanghai Hongqiao to Cangzhou Xi(4.5 hours),

then we can pick up you.

3.Can you be responsible for transport?

Yes,please tell me the destination port or address.we have rich experience in transport.

4.You are trade company or factory?

we have own factory.

5.What can you do if the machine broken?

The buyer send us the photos or videos. We will let our engineer to check and provide professional suggestions. If it needs change parts, we will send the new parts only collect cost fee.