-
Asphalt concrete slope flow value tester
Asphalt concrete slope flow value tester is designed and manufactured in accordance with the requirements stipulated in the 9.7 “Test for Slope Flow Value of Asphalt Concrete” of the “Test Code for Hydraulic Asphalt Concrete” (DL/T5362-2006) of the People’s Republic of China Electric Power Industry Standard.
-
Asphalt Dynamic Viscometer For Laboratory
Technical Parameters and Main Features
Temperature control range: 0.00℃ to 100.00℃
2. Temperature control accuracy: ±0.01℃
3. Operating pressure range: -40 KP ± 0.06 KP
4. Timing range: 0.0s to 99999.9s
5. Timing accuracy: ≤ 0.05%
Measurement range: approximately 18 Pa.s to 580,000 Pa.s
7. Sample quantity: 4 pieces
8. Dimensions: 620mm × 380mm × 63.50mm (length × width × height). -
Asphalt Cleveland Open Flash Point Tester
Working Conditions of the Instrument
Power Supply: 220V ± 10%, 50Hz
Rated power: 1100W
Ambient temperature: -10℃ to 50℃
Relative humidity: ≤ 85%
-
Asphalt Softening Point Tester
Technical Indicators
Test medium: water or glycerol (the instrument can automatically distinguish)
2. Temperature measurement range: 0℃ to 190℃
3. Heating rate: Automatically adjusted to (5.0 ± 0.5)℃/min after three minutes;
4. Test duration: 00:00 to 99:59
5. Temperature control method: Automatic control by the instrument, magnetic stirring
6. Steel ball weight: 3.50 ± 0.05 g
7. Steel ball diameter: 9.53mm
Beaker: 1000 mL
Instrument dimensions: 25 x 30 x 27 (cm) -
High and Low Temperature Fully Automatic Asphalt Penetration Tester
High and low temperature fully automatic asphalt penetration tester Overview This instrument is designed and manufactured in accordance with the requirements stipulated in T 0604-2011 “Test for Penetration of Bitumen” of the “Test Procedures for Bitumen and Bituminous Mixtures for Highway Engineering” (JTG E20-2011), a traffic industry standard of the People’s Republic of China. It is suitable for testing the penetration of road petroleum asphalt, modified... -
Asphalt penetration tester For Lab
1.Minimum division: Displacement: 0.01mm Time: 0.1s
2.Maximum range: 0 – 50 mm
3.The combined weight of the needle connecting rod, weights, and standard needle is 100 ± 0.05g.
4. Power Supply: AC 220V ± 10%, 50Hz
5. Petri dish: made of metal, flat bottom, dimensions: 70×45, 55×35 (mm)
6. Flat-bottomed insulated dish: made of glass, with a capacity greater than 1.5L and a depth greater than 80mm.
One tripod.8. Standard needle: 2.5g ± 0.05g, in compliance with the requirements of T 0604-2011 standard;
9. Heater power: 200W;
10. Temperature control accuracy: 25℃ ± 0.1℃ (Note: The ambient temperature should not exceed 20℃).
11. Temperature control method: PID high-precision digital temperature controller.
12. Stirring: Automatic magnetic stirring with stirring beads.
13. Dimensions: 35 x 26 x 49 cm
14. Instrument weight: 10 kg
-
Computer Marshall Stability Tester For Lab
1. Maximum load: 50kN.
2. Measuring range: ≤40kN.
3. Measuring error: ≤±0.1kN.
4. Overload protection function: Automatic protection when load value exceeds 49kN.
5. Vertical deformation (flow value): Measuring range 0~20mm. Measuring error ≤±0.05mm.
6. Press ascending speed: (50±5)mm/min.
7. Communication interface: RS232 serial communication port for communication with computer.
8. Working voltage: AC220V±10%, 50Hz.
9. Ambient temperature: 0℃~60℃.
10. Dimensions: 600mm×380mm×840mm (length×width×height).
11. Motor power: 550W.
12. Weight (net weight): 98kg. -
Type CNC Low-Temperature Asphalt Elongation Tester Lab
Type CNC Low-Temperature Asphalt Elongation Tester This instrument is designed in accordance with the requirements stipulated in the “Test Procedures for Asphalt and Asphalt Mixture in Highway Engineering” (JTG E20-2011) of the People’s Republic of China, specifically the “Asphalt Ductility Test” (T 0605-2011). It is suitable for determining the length of petroleum asphalt when it breaks under specified conditions and at a certain temperature, stretched at... -
Asphalt Laboratory Film Oven
Asphalt Laboratory Film Oven I. Overview The asphalt film oven (referred to as Model 82 oven) is designed and manufactured in accordance with the requirements of T 0609-2011 “Asphalt Film Heating Test” in the “Test Procedures for Asphalt and Asphalt Mixture in Highway Engineering” (JTG E20-2011), a national industry standard of the People’s Republic of China. It is suitable for determining the mass loss of road petroleum asphalt after film heating. According to n... -
Automatic Asphalt Mixture Rutting Tester (Popularization)
Automatic Asphalt Mixture Rutting Tester (Popularization) Main technical features： Intelligent type: Automatically generate and save test results; conveniently call up historical data and output test reports. 2. Point-to-point data acquisition: The upper and lower microcomputer measurement and control system is adopted to ensure the repeatability of deformation quantity acquisition in space. 3. High data acquisition resolution and fast speed: It adopts an analog-to-digital converter with a r... -
Centrifugal Rapid Extraction Instrument For Asphalt Mixture
1.Capacity of the material bowl: 1500g – 3000g
2.Power: 250 watts
3. Voltage: 220V
4. Rotational speed: 1300 – 3000 r/min
Diameter of the pot: 280mm
6. Overall weight: 100 kg; Dimensions: 600 mm (length) × 440 mm (width) × 620 mm (height) -
Theoretical maximum relative density meter for asphalt mixture
Theoretical maximum relative density meter for asphalt mixture This instrument is designed and manufactured in accordance with the requirements stipulated in T 0711-2011 “Test for Theoretical Maximum Relative Density of Asphalt Mixture (Vacuum Method)” in the standard JTG E20-2011 “Test Procedures for Asphalt and Asphalt Mixture in Highway Engineering” of the Ministry of Transport of the People’s Republic of China. It is applicable to the determination of ...
Product
Write your message here and send it to us
-
E-mail
-
Wechat
Wechat
-
Whatsapp
whatsapp
-
Facebook
-
Youtube
