40T Fully Automatic Fluorescent Tablet Press Machine

I.introduce 

Before installing, operating, maintaining, and inspecting the equipment, please read the “User Manual” carefully to fully utilize the equipment’s functions and ensure the safety of product use.

The schematic diagram in this user manual is for convenience. Due to product upgrades that may differ slightly from the actual product, please refer to the actual product.

II. Safety precautions

1.Before connecting the device to the power supply, ensure that the voltage used is consistent with that required by the device, and that the rated load of the power socket is not smaller than that required by the device.

2.Ensure that the ground cable is correctly and reliably connected.

3.The equipment is strictly prohibited from overload operation;

4.When the equipment is not in use, before maintenance and repair, the power supply should be cut off to avoid danger;

5.Equipment parameters should not be adjusted at will if not required for production;

6.Check and maintain regularly to ensure the lubrication of the running parts and good connection of the parts;

7.Keep the inside and outside of the equipment clean and clean in time.

III.Product Introduction

The press machine is mainly used in solid sample preparation and small powder tablet forming of fluorescence spectrometer. Widely used in powder metallurgy, cement, solid waste, catalysis, hydrochloric acid, batteries, ceramics and colleges and universities and other fields for composition analysis powder pressed into test pieces, suitable for various brands XRF ray fluorescence spectrometer and infrared spectrometer to provide sample products.

IV.Technical Parameters

For infrared spectroscopy and fluorescence spectroscopy detection, the daily sample testing volume is large, and reliable hardware support is provided.